All-Flo

Request an All-Flo catalog

1/4" Model
3/8" Model
1/2" Model
1" Model
1-1/2" Model
2" Model

3" Model

1" Model

1" Model Performance Plus

Air-Driven Double Diaphragm Pump Air-Driven Double Diaphragm Pump

NC-10

Polypropylene/Geolast/Nitrile

BK-10

Polypropylene/PTFE

BK-10E

Polypropylene/Santoprene/EPDM

BK-10V

Polypropylene/Viton

KN-10

PVDF /PTFE

KN-10E

PVDF/Santoprene/EPDM

KN-10V

PVDF/Viton

PB-10

Polypropylene/Geolast/Nitrile

PE-10

Polypropylene/Santoprene/EPDM

PT-10

Polypropylene/PTFE

PV-10

Polypropylene/Viton

KE-10

PVDF/Santoprene/EPDM

KT-10

PVDF/PTFE

KV-10

PVDF/Viton

AB-10

Aluminum/Geolast/Nitrile

AE-10

Aluminum/Santoprene/EPDM

AT-10

Aluminum/PTFE/Nylon

AV-10

Aluminum/Viton

SB-10

316 Stainless Steel/Geolast/Nitrile

SE-10

316 Stainless Steel/Santoprene/EPDM

SP-10

316 Stainless Steel/PTFE

SV-10

316 Stainless Steel/Viton

Capacity: Adjustable 0-40 gpm (152 liters/min)
Maximum Temperature:

KN-10 Model = 200F (93C)

Other Plastic Models = 150F (66C)

Metallic Models = 200F (93C)

Maximum Air Pressure:

KN-10 Model = 70 psi (4,8 bars)

Other Models = 100 psi (6,8 bars)

Minimum Air Pressure: All Models = 20 psi (1,2 bars)
Dry Lift Capacity at 100 psi (6,8 bars):

Models w/Teflon Balls = 10 ft (3 m)

Other Models = 15 ft (4,5 m)

Maximum Solids: 1/4" (6,4 mm)
Air Supply:

Inlet = 1/4" NPT Female

Outlet = 3/4" NPT Female

Fluid Inlet/Discharge: 1" NPT
Capacity:
Adjustable:
0-41 GPM (156 liters/min)
Maximum Temperature:

KT-10 Model:200°F (93°C)

Other Plastic Models: 150°F (66°C)

Metallic Models: 200°F (93°C)

Maximum Air Pressure: 120 PSI (8,2 bar)
Minimum Air Pressure: 20 PSI (1,3 bar)
Dry Lift Capacity@120 PSI (8,2 bar):

Models w/PTFE balls: 10 ft. (3 meters)

Other Ball Check models: 15 ft. (5,2 meters)

Models w/Max-Pass™ valves: 18 ft. (5,5 meters)

Maximum Solids:

1/4" (6,4 mm)

Models w/Max-Pass™ valves: 3/4" (19 mm)

Air Supply:

Inlet: 1/4" NPT Female

Outlet: 3/8" NPT Female

Note: Muffler Supplied

Fluid Inlet/Discharge:

Plastic Models: 1" Flange

Metallic Models:
(ANSI/DIN Compatible)
1" NPT

All-Flo 1inch
Footnotes:
  • Muffler supplied with each pump
  • Dual manifold inlet/outlet capability -
       Plastic models only
  • BSP threads available upon request
  •